KFD2-STC5-EX2 P+F SMART Transmitter Power Supply

Description

• Manufacturer : Pepperl+Fuchs

• Product no : KFD2-STC5-Ex2

• Product type : SMART Transmitter Power Supply

• 2-channel isolated barrier

• 24 V DC supply (Power Rail)

• Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources

• Output 0/4 mA ... 20 mA current sink/current source

• Terminals with test points

• Up to SIL 2 acc. to IEC 61508

• Signal type : Analog input

• Safety Integrity Level (SIL) : SIL 2

• Connection : Power Rail or terminals 14+, 15-

• Rated voltage : 18 ... 30 V DC

• Ripple : within the supply tolerance

• Power dissipation : = 1.4 W at maximium load

• Power consumption : = 2.6 W at maximium load

• Connection side : field side

• Connection : terminals 1+, 2-, 3; 4+, 5-, 6

• Input signal : 0/4 ... 20 mA

• Available voltage : = 16 V at 20 mA , terminals 1+, 3; 4+, 6

• Connection side : control side

• Connection : terminals 7+, 8-, 9-; 10+, 11-, 12- (sink)
  terminals 7-, 8+, 9+; 10-, 11+, 12+ (source)
  see additional information

• Load : 0 ... 600 O

• Output signal : 0/4 ... 20 mA (overload > 25 mA)

• Ripple : max. 50 µA rms

• External supply (loop) : 2 ... 30 V DC

• Deviation : at 20 °C (68 °F), 0/4 ... 20 mA
  = 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage

• Influence of ambient temperature : = 0.25 µA/K

• Frequency range : field side into the control side: band width with 1 Vpp signal 0 ... 7.5 kHz (-3 dB)
  safe area to hazardous area: band width with 1 VSS signal 0.3 ... 7.5 kHz (-3 dB)

• Settling time : 200 µs

• Rise time/fall time : 100 µs

• Output/power supply : functional insulation, rated insulation voltage 50 V AC

• Output/Output : functional insulation, rated insulation voltage 50 V AC

• Display elements : LED

• Labeling : space for labeling at the front

• Electromagnetic compatibility

• Directive 2014/30/EU : EN 61326-1:2013 (industrial locations)

• Electromagnetic compatibility : NE 21:2012
  EN 61326-3-2:2008

• Degree of protection : IEC 60529:2001

• Protection against electrical shock : UL 61010-1:2012

• Ambient temperature : -20 ... 60 °C (-4 ... 140 °F)

• Degree of protection : IP20

• Connection : screw terminals

• Mass : approx. 200 g

• Dimensions : 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2

• Mounting : on 35 mm DIN mounting rail acc. to EN 60715:2001

• EU-Type Examination Certificate : CML 17 ATEX 2031 X

• Input : [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I

• Supply

• Maximum safe voltage : 250 V (Attention! The rated voltage can be lower.)

• Equipment : terminals 1+, 3-; 4+, 6-

• Voltage Uo : 26.2 V

• Voltage Uq : 27.25 V

• Current Io : 93 mA

• Power Po : 634 mW

• Equipment : terminals 2-, 3+; 5-, 6+

• Voltage Ui : 30 V

• Current Ii : 115 mA

• Power Pi : max 1 W

• Voltage Uo : 2 V

• Current Io : 8.5 mA

• Power Po : 4.3 mW

• Equipment : terminals 1+, 2/3-; 4+, 5/6-

• Voltage Uo : 26.2 V

• Voltage Uq : 27.25 V

• Current Io : 115 mA

• Power Po : 784 mW

• Certificate : CML 17 ATEX 3030 X

• Marking : II 3G Ex ec IIC T4 Gc

• Galvanic isolation

• Input/Output : safe electrical isolation acc. to IEC/EN 60079-11:2012, voltage peak value 375 V

• Input/power supply : safe electrical isolation acc. to IEC/EN 60079-11:2012, voltage peak value 375 V

• Directive conformity

• Directive 2014/34/EU : EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015

• Control drawing : 116-0439 (cULus)

• IECEx approval : IECEx CML 17.0016X

• Approved for : [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I , Ex ec IIC T4 Gc

• Shipping Weight : 1 Kg